The SST-PN-2-PE is a PROFIBUS/PROFINET communication board manufactured by Molex and bundled by Yask...
The SST-PN-2-PE is a PROFIBUS/PROFINET communication board manufactured by Molex and bundled by Yaskawa for the YRC1000 / YRC1000micro robot controller. It plugs into the PCI Express slot on the controller and lets a Siemens S7 PLC (such as S7-1200 / S7-1500) exchange cyclic I/O data with the Yaskawa robot over PROFINET IO.
· Model: SST-PN-2-PE (board variant of the Molex SST-ETH-PCIE family)
· Protocol: PROFINET IO (IO Controller / IO Device)
· Host interface: PCI Express half-length, half-height or full-height bracket
· Maximum cyclic connections: up to 32
· I/O points: up to 1008 input and 1008 output points
· Module / sub-modules per device: up to 64
· Supply: 3.3V from PCIe slot
· Operating temperature: 0 – 55 °C
· Approvals: CE, cUL, RoHS, REACH, KCC
The board is used in automated cells where a Siemens PLC is the main controller and a Yaskawa YRC1000 robot handles pick-and-place, palletizing, machine tending or welding. The PLC writes start / stop / job-number commands and reads robot status, position and fault codes over PROFINET — no separate PLC-to-robot wiring is needed beyond the standard Ethernet cable between the PLC PROFINET port and the board.
Configuration is done with the Molex/Hilscher SST setting tool; the Yaskawa INFORM robot side only needs the standard I/O mapping set up on the pendant.
NTROB stocks new and refurbished SST-PN-2-PE and the equivalent SST-ETH-PCIE Molex cards for Yaskawa YRC1000, YRC1000micro and NX100 / DX200 controllers. We also supply:
· Other fieldbus options for Yaskawa: EtherNet/IP, DeviceNet, CC-Link, PROFIBUS DP
· Replacement Yaskawa servo packs, encoders, teach pendants and main boards
· Repair and commissioning service for Yaskawa robot cells, including PLC-side PROFINET integration
Please send us the controller serial number and your PLC model for exact compatibility check.